陕西海山机电有限公司

Bar heating equipment

14
发表时间:2023-07-15 08:46作者:Haishan Electromechanical来源:Shaanxi Haishan Mechanical and Electrical Co., Ltd网址:http://www.sxhszpl.com

       Bar heating equipmentyesShaanxi Haishan Mechanical and Electrical Co., Ltd.An induction heating equipment for round steel, aluminum rods, copper rods and other cylindrical materials designed and manufactured based on the principle of electromagnetic induction heating. The heating diameterPhi20~fWithin the 280mm range, the heating efficiency can be configured with different heating powers according to productivity requirements to meet demand. Generally, fully automatic feeding, heating, temperature measurement, etc. are used to realize an automated production line for bar heating. under,Haishan electric furnaceThe editor gives an example to introduce this bar heating equipment.

锻造加热生产线.jpg

one,Bar heating equipment‍Heating workpiece parameter example:

serial number

Blank weight (kg)

Blank specifications (mm)

Heating temperature (℃)

Production cycle time (s)

Frequency (HZ)

1

1.21

φ30×220

1200℃

5.5

6000

2

3.22

φ50×210

1200℃

13

2500

3

5.88

φ80×150

1200℃

23.5

1000

4

10.6

φ120×120

1200℃

43

1000

       

two,Bar heating equipmentBrief description of work process:

Manually place the materials one by one from the material box onto the inclined roller plate (10--15 materials can be placed) and arrange them neatly. After the blanks slide into the feed chute in turn, a pneumatic pushing device is used to push the materials according to the rhythm.Bar heating equipmentHeating is carried out until the discharge end reaches the specified temperature, and then the material is slid into the next process through the chute.

three,Bar heating equipmentScope of supply:

serial number

content

quantity

Remark

1

Thyristor medium frequency inverter KGPS-350/1--6

1 set


2

Compensation capacitor cabinet 0.75-1000-1S, 2.5S, 6S

1 set


3

induction heating furnace


Includes water-cooled rails

3.1

GTR30×2400

1 set


3.2

GTR50×2400

1 set



3.3

GTR80×2400

1 set



3.4

GTR120×2400

1 set


4

Pneumatic pushing device

1 set


5

External console

1 set


6

inclined roller plate

1 set


7

Exit chute

1 set


8

Circulating cooling water system FL--500

1 set


9

Field wiring



10

Two years of random spare parts

1 set

See table below

       

Four,Bar heating equipmentManufacturing Standards:

1. ZB46001-87 "Semiconductor Frequency Conversion Device for Induction Heating";

2. JB4086-85 "Technical Conditions for Electric Control Equipment for Medium Frequency Induction Heating";

3. GB1006.3-88 "Basic technical conditions for electric heating equipment. Induction heating equipment";

4. GB595 9.3-88 "Safety of Electric Heating Equipment—Special Requirements for Induction and Conductive Heating Equipment and Induction Melting";

5. GB/T5226-1996 "General Technical Conditions for Industrial Machinery and Electrical Equipment" standard.

five,Bar heating equipmentSafety measures:

       1.Bar heating equipmentThe electrical connection parts are equipped with necessary warnings (lightning symbols, prompts, partitions, etc.), protection and shielding to protect the safety of maintenance and operators.

2. Complete setBar heating equipmentDevice interlocking and protection performance; there are interlocks and fault alarms such as emergency stop, over-voltage, over-current, phase loss, voltage feedback, current feedback, component over-temperature and cooling system under-voltage water cutoff, high water temperature, etc. to ensure that the equipment is not damaged. Material melting in the induction heater, personal safety and other malfunctions may occur.

3. Complete setBar heating equipmentThe device starts and stops reliably and in reasonable timing, which can effectively avoid harm to equipment and people caused by misoperation.

       4.Bar heating equipmentManufacturing and installation are carried out in accordance with the Ministry of Machinery Industry's Safety Evaluation Standards for Machinery Factories.

       5.Bar heating equipmentManufactured according to national induction heating furnace standards and in line with national environmental protection and safety standards.


6. What Party A should satisfyBar heating equipmentOn-site working conditions:

1. Power supply provided: 3Ф 380V±10% 50HZ 440KVA

2. Altitude: less than or equal to 1000M

3. Relative humidity: no more than 95%

4. Cooling circulating water: the maximum inlet water temperature is not higher than 35℃. 0.2-0.3mpa water pressure. Water consumption is 15 cubic meters/hour. Water quality should be softened.

5. No conductive dust and corrosive gas

6. Provide an air source with a pressure of 0.4-0.6mpa

7. Party A shall follow the instructions provided by Party BBar heating equipmentFoundation diagrams and waterway diagrams provide connections between civil foundation construction and cooling water sources and equipment.

阶梯上料加热炉2.jpg

If anyBar heating equipmentFor needs, please call Manager Guo at 13891812360; moreBar heating equipmentFor information, please follow the website of Shaanxi Haishan Mechanical and Electrical Co., Ltd. http://www.sxhszpl.com

服务热线
 
 
 工作时间
周一至周日 :8:30-17:30
 联系方式
国:13891812360