1 Ton Series Induction Furnace

       1 ton series induction electric furnaceAlso called an intermediate frequency melting furnace, it is also a medium frequency furnace and is widely used in metal smelting in the foundry industry. According to the difference in inverter resonance, it is divided into ordinary 1 ton induction electric furnace and 1 ton series induction electric furnace. The 1 ton series induction electric furnace is divided into one medium frequency power supply and one melting furnace body.1 ton series induction electric furnaceIt is a 1 ton one-to-two induction electric furnace equipped with one medium frequency power supply and two furnace bodies working at the same time. This kind of electric furnace uses a series resonant circuit, and its electrical efficiency is much higher than that of a parallel inverter electric furnace. It has a one-to-two function, and one power supply can supply power to two electric furnaces at the same time. Its power is distributed arbitrarily as needed, which is efficient, fast and energy-saving. under,Haishan electric furnaceThe editor will introduce this1 ton series induction electric furnace。

one,1 ton series induction electric furnace‍Essential installation environment:

      1、1 ton series induction electric furnaceThe installation site should be solid and flat with sufficient load-bearing capacity.

      2、1 ton series induction electric furnaceThere should be good grounding devices and leakage protection devices.

      3、1 ton series induction electric furnaceInstall as far away from flammable and explosive items and volatile gases as possible, as well as away from splashes and noise.

      4、1 ton series induction electric furnaceThe control system circuit board and various sensors are installed in a shielded room, isolated from high-voltage and high-current copper bars and power devices, avoiding strong electromagnetic field interference, allowing the circuit board to work in a closed and clean environment, improving the service life of the circuit board. The control system is stable and reliable.

     5、1 ton series induction electric furnaceUnder any load conditions, including full furnace charge and frozen furnace starting success rate, the success rate is 100%.

two,1 ton series induction electric furnaceParameters:

according to1 ton series induction electric furnaceThese parameters can be understood1 ton series induction electric furnacepower requirements, current input, melting time and the composition and characteristics of the furnace body.

1. Rated capacity: 1 ton Maximum capacity: 1.2 tons

2. Medium frequency power supply voltage: three-phase 380V/660V

3. Heating frequency: 1000Hz

4. Rated input power: approximately/750KW (depending on different materials, melting time and other parameters)

5. Heating temperature: 1650 degrees

6. Melting time: within 60 minutes (depending on heating power, material and melting time)

7. Power factor: greater than 0.95

      8、1 ton series induction electric furnaceThe furnace body is composed of steel plates and shaped steel and uses energy-saving materials. It has the advantages of small size, light weight, fast melting speed, energy saving and high efficiency.

three,1 ton series induction electric furnacespecialty:

1. Fast heating speed:1 ton series induction electric furnaceThe heating speed is fast and can quickly heat the charge (liquid steel) to the required temperature.
2. Good steelmaking effect:1 ton series induction electric furnaceDuring the steelmaking process, there is no ultra-high temperature effect of the arc, so the burning loss rate of elements in the steel is low.

3. Good metallurgical effect:1 ton series induction electric furnaceThe slag is heated by molten steel, has a lower temperature, and is less capable of participating in metallurgical reactions. The effects of metallurgical processes such as desulfurization, dephosphorization, and diffusion deoxidation are worse than those of electric arc furnace steelmaking.

4. Energy saving and high efficiency:1 ton series induction electric furnaceUsing a series resonant circuit has higher electrical efficiency and is easy to form closed-loop control, which is considered an ideal energy-saving solution.

5. Easy to operate:1 ton series induction electric furnaceThe control system is stable, reliable and easy to operate.

6. Strong versatility:1 ton series induction electric furnaceSuitable for different melting needs and materials.

It should be noted that the specific usage and introduction may be slightly different depending on different manufacturers and models. if you need1 ton series induction electric furnaceFor more detailed information, it is recommended to contact the national manager directly at 13891812360; more1 ton series induction electric furnaceFor information, please follow the website of Shaanxi Haishan Mechanical and Electrical Co., Ltd. http://www.sxhszpl.com.