Medium Frequency Furnace Dust Removal Hood

The intermediate frequency electric furnace dust hood is a tornado dust hood specially designed and manufactured for the smelting furnace in the foundry workshop. It is used to collect and capture the smoke and waste gas generated by melting scrap metal in the intermediate frequency smelting furnace. It is installed on the pavement of the intermediate frequency electric furnace.Not only can it tilt forward and backward, but it can also stay in any position. under,Haishan electric furnaceThe editor will introduce this setTornado type medium frequency electric furnace dust cover。

one,Tornado type medium frequency electric furnace dust coverprinciple:

      Tornado type medium frequency electric furnace dust coverThe principle is based on the natural phenomenon of tornadoes. When the tornado hood is activated, a small vortex similar to a tornado forms in the area in front of the furnace. Hot gas and exhaust gas enter the vortex from the furnace mouth, are transferred by the rotating air center and gathered in the vortex, and then are exported and collected.

As the inside of the vortex spins faster and faster, this creates a centrifugal force that moves outward toward the center. This causes metal particles or solid materials to clump together in the vortex and eventually be collected. so,Tornado type medium frequency electric furnace dust coverThe principle of centrifugal force and tornado rotation is used to filter and collect debris and waste gas in the area in front of the furnace.

two,Tornado type medium frequency electric furnace dust coverparameter:

       1、Tornado type medium frequency electric furnace dust coverForm - using centralized pipeline + branch pipeline + rotating dust hood

       2、Tornado type medium frequency electric furnace dust coverSmoke capture rate: >98% (the factory does not emit smoke)

       3、 Tornado type medium frequency electric furnace dust coverDust collection rate: 98%

       4、Tornado type medium frequency electric furnace dust coverEmission concentration: <30mg/m3

       5、Medium frequency electric furnaceLiquid steel surface temperature: 1200-1600℃

       6、Medium frequency electric furnaceFlue gas treatment capacity: 8000 m3/h/

three,Tornado type medium frequency electric furnace dust coverJob introduction:

       Tornado type medium frequency electric furnace dust coverDriven by an oil cylinder, the rotating oil cylinder is installed onMedium frequency electric furnaceOn the stovetop.Medium frequency electric furnaceThe top of the stove is entirely composed of steel structural components, and the absorbed flue gas passes throughTornado type medium frequency electric furnace dust coverThe adjacent spiral arm and pipe are discharged. The oil cylinder drives the flipping of the "tornado" furnace cover dust-catching cover, and the flipping angle of the cover is 90°. When the medium frequency electric furnace taps molten steelTornado type medium frequency electric furnace dust coverIt is turned over together with the furnace body, which can effectively absorb the flue gas generated during the production operation of the Haishan electric furnace, including the waste gas during the furnace charging, molten steel tapping, slag tapping and furnace lining replacement.Tornado type medium frequency electric furnace dust coverIt replaces the function of the furnace cover of the medium frequency electric furnace. When the medium frequency electric furnace heats up and melts, the device can both smoke the gas and prevent the heat from dissipating, which is beneficial to improving the thermal efficiency of the electric furnace.

Four,Tornado type medium frequency electric furnace dust coveradvantage:

        1、Tornado type medium frequency electric furnace dust coverIt is used to collect the dust source gas of the smelting furnace. The smoke and dust gas generated during the smelting process of the intermediate frequency furnace is sucked away by strong wind, and then introduced into the matching pulse bag dust collector for purification treatment. This vacuum hood takes up little space and has a strong vacuuming effect. It can not only be tilted forward and backward, but also can stay in any position.
       2、Tornado type medium frequency electric furnace dust coverWhen opening in the forward direction, the feeding operation is performed. When workers are operating the Haishan electromechanical smelting furnace, the cyclone dust collector prevents the operator from being baked by the forward-turned furnace cover and reduces the operator's work intensity.
        3、Tornado type medium frequency electric furnace dust coverWhen opened in the reverse direction, it is beneficial to eject the furnace lining without removing the dust cover; it is also convenient for maintenance of the induction furnace pouring port.
       4、Tornado type medium frequency electric furnace dust coverWhen the furnace worker is operating, the cyclone dust cover prevents the operator from being baked by the forward-turned furnace cover and reduces the operator's work intensity.
      5、Tornado type medium frequency electric furnace dust coverAs an efficient collection device for medium frequency electric furnace smoke gas, the smoke gas is introduced into the purification device (pulse bag dust collector) through electric dust collection. After processing, the dust concentration at the outlet is ≤10mg/m3, reaching the best environmental protection standards.

If anyTornado type medium frequency electric furnace dust coverFor needs, please call Manager Guo at 13891812360; moreTornado type medium frequency electric furnace dust coverFor information, please follow the website of Shaanxi Haishan Mechanical and Electrical Co., Ltd. http://www.sxhszpl.com