End heating medium frequency furnace
发表时间：2023-10-06 08:29来源：Shaanxi Haishan Mechanical and Electrical Co., Ltd
End heating medium frequency furnaceIt is a non-standard medium frequency induction equipment that uses the principle of electromagnetic induction heating to heat the end, part or end of the workpiece. This styleEnd heating medium frequency furnaceIt has the advantages of fast heating speed, high efficiency, and less oxidation and decarburization. It is widely used in plate spring hot coil heating, round steel end heating, etc. It is one of the important equipment in modern thermal processing production.Haishan electric furnaceThe editor has compiled someEnd heating medium frequency furnaceThe knowledge is as follows for your reference.
one,End heating medium frequency furnaceintroduce:
End heating medium frequency furnaceIt is mainly composed of intermediate frequency power supply, sensor, control system and cooling system.
1. Medium frequency power supply:End heating medium frequency furnaceThe power supply adopts medium frequency power supply, and its operating frequency is usually between 100Hz~8000Hz. The intermediate frequency power supply can be controlled by thyristor power electronic devices to achieve rapid heating of the ends or local parts of metal workpieces.
2. Sensor: The sensor isEnd heating medium frequency furnaceThe core component, its main function is to generate an alternating magnetic field inside the workpiece, thereby generating heat inside the workpiece. The inductor usually consists of a spiral coil wound by a rectangular copper tube. A medium-frequency current is passed through the coil to generate an alternating magnetic field, and the iron core is used to enhance the strength of the magnetic field.
3. Control system:End heating medium frequency furnaceThe control system is mainly used to control the output power, frequency and other parameters of the power supply to achieve rapid and accurate heating of the workpiece. The control system usually consists of a microprocessor, power amplifier, sensors, etc., and can be operated through a human-machine interface such as a touch screen or buttons.
4. Cooling system:End heating medium frequency furnaceThe cooling system is mainly used to cool the intermediate frequency power supply, sensor coils, etc. to ensure the normal operation of the equipment. The cooling system usually uses water cooling.
two,End heating medium frequency furnacethe use of:
End heating medium frequency furnaceIt has a wide range of uses, mainly used for end or local heating of metal workpieces, such as heating the ends and middle parts of round steel, steel pipes, and steel plates, such as heating the ends of round steel to make the pier thicker, and heating the ends of steel pipes to shrink. Induction heating before opening or enlarging holes, bolt heads, steel pipe closing or round bar forging. Heating before online forging of metal materials (such as precision forging of gears, half-shaft connecting rods, bearings, etc.), extrusion, hot rolling, and shearing.
three,End heating medium frequency furnacespecialty:
1、End heating medium frequency furnaceThe production operation is simple, the feeding and discharging materials are flexible, the degree of automation is high, and online production can be realized.
2、End heating medium frequency furnaceIt adopts multi-hole induction heating coil, which can be used for end heating or middle position heating of the billet;
3、End heating medium frequency furnaceThe workpiece has fast heating speed, less oxidation and decarburization, high efficiency, and good forging quality.
4、End heating medium frequency furnaceIt is easy to detect the temperature of the blank at each hole position;Each hole is equipped with an audible and visual alarm to remind workers to discharge materials;
5、End heating medium frequency furnaceThe workpiece heating length, speed, temperature, etc. can be accurately controlled.
6、End heating medium frequency furnaceThe degree of automation is low, and materials are generally put in and out manually. If an automatic robotic arm device is used, multiple sets of pushing devices and discharging devices need to be configured, or a mechanism with a complex structure may be configured to achieve this;
7、End heating medium frequency furnaceThe workpiece is heated evenly, the temperature difference between the core and the surface is small, and the control accuracy is high.
8、End heating medium frequency furnaceThe feeding roller facilitates the entry and exit of blanks and reduces the labor intensity of workers; the mechanism is simple and the production cost is relatively low;
9、End heating medium frequency furnaceIt complies with environmental protection standards, has little pollution, and also reduces the labor intensity of workers.
If anyEnd heating medium frequency furnaceFor needs, please call Manager Guo at 13891812360; moreEnd heating medium frequency furnaceFor information, please follow the website of Shaanxi Haishan Mechanical and Electrical Co., Ltd. http://www.sxhszpl.com