Medium Frequency Induction Heating Furnace6
Medium frequency diathermy furnaceIt is a medium frequency induction heating device that converts 50HZ power frequency alternating current into medium frequency (above 100HZ to 8K HZ). It is mainly used for heating metal workpieces in the forging industry and heat treatment industry. During heating, it can penetrate and heat the workpiece as a whole, causing the current to flow in the metal body to generate heat, achieving eddy current heating, with fast heating speed and good heating effect. at the same time,Medium frequency diathermy furnaceIt can carry out automatic control and conduct open-loop and closed-loop control of heating temperature, power, flow, speed and other parameters to facilitate operation and management. here,Haishan electric furnaceThe editor will introduce this setMedium frequency diathermy furnace。
one,Medium frequency diathermy furnaceskills requirement: 1. Heating material:Medium frequency diathermy furnaceIt can heat various metal materials, such as steel rods, steel pipes, copper rods, aluminum rods, stainless steel, etc. 2. Heating temperature:Medium frequency diathermy furnaceThe heating temperature can be adjusted according to actual needs. Generally, the heating temperature can be as high as 1250℃. 3. Power supply system:Medium frequency diathermy furnaceThe power supply system usually uses thyristor intermediate frequency power supply, and its frequency range is usually 160-8000KW/0.2-2.5KHZ. 4. Feeding system:Medium frequency diathermy furnaceMaterials are usually loaded by regularly pushing materials using a cylinder or hydraulic cylinder. 5. Discharging system:Medium frequency diathermy furnaceThe discharging system usually uses a roller conveyor system for transportation. 6. Human-machine interface:Medium frequency diathermy furnaceUsually a PLC fully automatic intelligent touch screen control system is used for control, which can realize automatic operation. 7. Temperature measurement system:Medium frequency diathermy furnaceUsually infrared thermometer and temperature three-point selection are used for temperature measurement. two,Medium frequency diathermy furnaceHeating classification: 1、Medium frequency diathermy furnacePeriodic induction heating. That is, only one blank is placed in the thermal inductor for heating. After reaching the required heating temperature, the power supply is stopped, the heated blank is taken out of the furnace, and then a cold blank is put in. 2、Medium frequency diathermy furnaceSequential induction heating. That is, multiple blanks are placed in the inductor at the same time. During the induction heating process, these blanks are pushed from one end of the inductor to the other end according to a certain time rhythm. That is, every time a cold blank is added from the feed end, a cold blank will be output from the discharge end. The hot blank reaches the heating temperature. When the cold blank is fed in, the sensor is constantly powered. 3、Medium frequency diathermy furnaceContinuous induction heating. That is, the long blank continuously passes through the sensor, and is gradually heated to the required temperature while advancing at a constant speed. The material is continuously discharged from the discharging end, and the sensor is continuously powered. three,Medium frequency diathermy furnacePackage: 1、Medium frequency diathermy furnaceGenerally equipped with cooling system, PLC control system, manipulator and other components. The cooling system can ensure the stable operation of the equipment and protect the furnace lining; the PLC control system can control the heating process of the equipment and improve heating efficiency; the manipulator can be used to automate material loading and discharging to improve production efficiency. 2、Medium frequency diathermy furnaceThere are also a variety of furnace lining materials to choose from, such as silicon carbide, white steel jade, stainless steel and integral knotting. Users can choose appropriate furnace lining materials according to actual needs to achieve the best heating effect. Four,Medium frequency diathermy furnacespecialty: 1. Heating quality:Medium frequency diathermy furnaceIt can realize the overall penetrating heating of metal materials, so that the variable frequency current flows in the metal body with resistance to generate heat, realizing eddy current heating, with fast heating speed and good heating effect. 2. Degree of automation:Medium frequency diathermy furnaceIt has a high degree of automation and can achieve precise control of heating temperature, heating power, heating time and other parameters. It can also automatically complete operations such as loading and discharging, reducing manual intervention and improving production efficiency. 3. Power saving effect:Medium frequency diathermy furnaceIt uses advanced digital phase-locking technology to realize automatic frequency tracking, which can automatically adapt to various sensors, improve the operating efficiency of the equipment, and has a significant power-saving effect, saving 60% of power than traditional equipment and 20% of power than thyristor equipment. %. 4. Environmental performance:Medium frequency diathermy furnaceThe short heating time can reduce the degree of metal oxidation and decarburization, and reduce the burn loss rate. At the same time, the equipment adopts environmentally friendly materials and low-noise design, which can meet environmental protection requirements. In general,Medium frequency diathermy furnaceIt is an efficient, energy-saving, environmentally friendly and highly automated heating equipment that has been widely used in the forging and heat treatment industries.
If anyMedium frequency diathermy furnaceFor needs, please call Manager Guo at 13891812360; moreMedium frequency diathermy furnaceFor information, please follow the website of Shaanxi Haishan Mechanical and Electrical Co., Ltd. http://www.sxhszpl.com |
