Long bar heating furnace before shearing

Long bars need to be divided into different bar lengths according to the process before forging or extrusion. In particular, aluminum bars need to be warm-cut to a certain length before hot extrusion. andLong bar heating furnace before shearingThat's itEquipment specially used for heating long bars before shearing. It can heat long bars to a certain temperature to make them easier to shear and improve shearing efficiency.It has the advantages of flexible production organization, high degree of automation, good operating environment, and low energy consumption, and is quickly widely adopted by manufacturers. here,Haishan electric furnaceLet me talk about this setLong bar heating furnace before shearing。

one,Long bar heating furnace before shearingTechnical Parameters:

1. Furnace type: medium frequency furnace induction heatingLong bar heating furnace before shearing

　   2、Long bar heating furnace before shearingLayer size: 7000X1950X1850mm (length X width X height). (Can be customized according to customer needs)

3. Rod furnace rod capacity: Φ120 rods, single row continuous feeding and heating, rods with a length of 6000mm. (Can be customized according to customer needs)

4. Maximum heating capacity: 800 kg/hour. (Changes with changes in furnace rod capacity)

5. Rated temperature: room temperature ~550℃

6. High heating temperature: ~650℃

7. Point consumption: 150 degrees/ton of aluminum rods

8. Equipped with large heating capacity: 94.4kw/h

9. The quality of the aluminum produced: After heating, the aluminum rod has good plasticity and low deformation resistance, and obtains uniform and good structural properties. The surface quality of the aluminum is smoother, more textured and of higher quality than similar aluminum produced. excellent.

two,Long bar heating furnace before shearingcomposition:

     Long bar heating furnace before shearingIt usually consists of heating device, conveying device and control system. The heating device adopts medium frequency induction heating technology, which can heat long bars quickly and evenly. The conveying device is used to convey the heated long bar material to the shearing equipment for shearing. The control system can control heating temperature, heating time, conveying speed and other parameters to meet different shearing needs.

three,Long bar heating furnace before shearingPrecautions for use:

1. First of all,Long bar heating furnace before shearingAppropriate heating temperature and heating time should be selected to ensure that the long bar can be cooled quickly after reaching the required temperature, while avoiding overheating that may cause material deformation or oxidation.

2. Secondly, check regularlyLong bar heating furnace before shearingCheck whether the operating status and parameters are normal. If any abnormalities are found, they should be handled in time.

3. Finally, pay attention toLong bar heating furnace before shearingMaintenance and maintenance, such as regular cleaning of the heating device and conveying device of the Haishan electric furnace, to ensure the normal operation and service life of the equipment.

Four,Long bar heating furnace before shearingspecialty:

       1、Long bar heating furnace before shearingFast heating speed, no oxidation and decarburization, and high heating efficiency. Since the principle of medium frequency induction heating is electromagnetic induction, heat is generated from the workpiece itself. There is only slight flaking of the metal surface, and light polishing restores the specular finish and thus material properties.

2. The long rod can be heated evenly; the temperature can be accurately controlled. By choosing a reasonable working efficiency, adjust the appropriate long rod heating temperature. The Haishan long rod heating furnace ensures a small temperature difference from the surface to the core. Haishan electric furnace temperature control system can accurately monitor and control heating temperature.

      3、Long bar heating furnace before shearingLow energy consumption and high thermal efficiency. Compared with other heating methods, Haishan electric furnace can effectively reduce energy consumption and improve labor productivity. The pollution-free index meets the environmental requirements of national standards.

     4、Long bar heating furnace before shearingSimple operation, flexible operation and high degree of automation. Automatic feeding and automatic unloading independent detection device, PLC fully automatic intelligent control system.

In short,Long bar heating furnace before shearingIt is an important metal processing equipment that can improve the shearing efficiency and shearing quality of long bars. In actual operation, it is necessary to pay attention to the selection, use and maintenance of equipment to ensure the normal operation and service life of the equipment.

If anyLong bar heating furnace before shearingFor needs, please call Manager Guo at 13891812360; moreLong bar heating furnace before shearingFor information, please follow the website of Shaanxi Haishan Mechanical and Electrical Co., Ltd. http://www.sxhszpl.com